Angr - Examples

HackTricks'i Destekleyin

• abonelik planlarını kontrol edin!

• Bize katılın 💬 Discord grubuna veya telegram grubuna veya bizi Twitter'da 🐦 @hacktricks_live** takip edin.**

• Hacking ipuçlarını paylaşmak için HackTricks ve HackTricks Cloud github reposuna PR gönderin.

Eğer program stdin'den birden fazla değeri almak için scanf kullanıyorsa, scanf'den sonra başlayan bir durum oluşturmanız gerekir.

Kodlar https://github.com/jakespringer/angr_ctf adresinden alınmıştır.

Adrese ulaşmak için girdi (adres belirten)

import angr
import sys

def main(argv):
path_to_binary = argv[1]  # :string
project = angr.Project(path_to_binary)

# Start in main()
initial_state = project.factory.entry_state()
# Start simulation
simulation = project.factory.simgr(initial_state)

# Find the way yo reach the good address
good_address = 0x804867d

# Avoiding this address
avoid_address = 0x080485A8
simulation.explore(find=good_address, avoid=avoid_address)

# If found a way to reach the address
if simulation.found:
solution_state = simulation.found[0]

# Print the string that Angr wrote to stdin to follow solution_state
print(solution_state.posix.dumps(sys.stdin.fileno()))
else:
raise Exception('Could not find the solution')

if __name__ == '__main__':
main(sys.argv)

Adrese ulaşmak için girdi (yazdırmaları gösterir)

# If you don't know the address you want to recah, but you know it's printing something
# You can also indicate that info

import angr
import sys

def main(argv):
path_to_binary = argv[1]
project = angr.Project(path_to_binary)
initial_state = project.factory.entry_state()
simulation = project.factory.simgr(initial_state)

def is_successful(state):
#Successful print
stdout_output = state.posix.dumps(sys.stdout.fileno())
return b'Good Job.' in stdout_output

def should_abort(state):
#Avoid this print
stdout_output = state.posix.dumps(sys.stdout.fileno())
return b'Try again.' in stdout_output

simulation.explore(find=is_successful, avoid=should_abort)

if simulation.found:
solution_state = simulation.found[0]
print(solution_state.posix.dumps(sys.stdin.fileno()))
else:
raise Exception('Could not find the solution')

if __name__ == '__main__':
main(sys.argv)

Kayıt defteri değerleri

# Angr doesn't currently support reading multiple things with scanf (Ex:
# scanf("%u %u).) You will have to tell the simulation engine to begin the
# program after scanf is called and manually inject the symbols into registers.

import angr
import claripy
import sys

def main(argv):
path_to_binary = argv[1]
project = angr.Project(path_to_binary)

# Address were you want to indicate the relation BitVector - registries
start_address = 0x80488d1
initial_state = project.factory.blank_state(addr=start_address)


# Create Bit Vectors
password0_size_in_bits = 32  # :integer
password0 = claripy.BVS('password0', password0_size_in_bits)

password1_size_in_bits = 32  # :integer
password1 = claripy.BVS('password1', password1_size_in_bits)

password2_size_in_bits = 32  # :integer
password2 = claripy.BVS('password2', password2_size_in_bits)

# Relate it Vectors with the registriy values you are interested in to reach an address
initial_state.regs.eax = password0
initial_state.regs.ebx = password1
initial_state.regs.edx = password2

simulation = project.factory.simgr(initial_state)

def is_successful(state):
stdout_output = state.posix.dumps(sys.stdout.fileno())
return 'Good Job.'.encode() in stdout_output

def should_abort(state):
stdout_output = state.posix.dumps(sys.stdout.fileno())
return 'Try again.'.encode() in stdout_output

simulation.explore(find=is_successful, avoid=should_abort)

if simulation.found:
solution_state = simulation.found[0]

solution0 = solution_state.solver.eval(password0)
solution1 = solution_state.solver.eval(password1)
solution2 = solution_state.solver.eval(password2)

# Aggregate and format the solutions you computed above, and then print
# the full string. Pay attention to the order of the integers, and the
# expected base (decimal, octal, hexadecimal, etc).
solution = ' '.join(map('{:x}'.format, [ solution0, solution1, solution2 ]))  # :string
print(solution)
else:
raise Exception('Could not find the solution')

if __name__ == '__main__':
main(sys.argv)

Yığın değerleri

# Put bit vectors in th stack to find out the vallue that stack position need to
# have to reach a rogram flow

import angr
import claripy
import sys

def main(argv):
path_to_binary = argv[1]
project = angr.Project(path_to_binary)

# Go to some address after the scanf where values have already being set in the stack
start_address = 0x8048697
initial_state = project.factory.blank_state(addr=start_address)

# Since we are starting after scanf, we are skipping this stack construction
# step. To make up for this, we need to construct the stack ourselves. Let us
# start by initializing ebp in the exact same way the program does.
initial_state.regs.ebp = initial_state.regs.esp

# In this case scanf("%u %u") is used, so 2 BVS are going to be needed
password0 = claripy.BVS('password0', 32)
password1 = claripy.BVS('password1', 32)

# Now, in the address were you have stopped, check were are the scanf values saved
# Then, substrack form the esp registry the needing padding to get to the
# part of the stack were the scanf values are being saved and push the BVS
# (see the image below to understan this -8)
padding_length_in_bytes = 8  # :integer
initial_state.regs.esp -= padding_length_in_bytes

initial_state.stack_push(password0)
initial_state.stack_push(password1)

simulation = project.factory.simgr(initial_state)

def is_successful(state):
stdout_output = state.posix.dumps(sys.stdout.fileno())
return 'Good Job.'.encode() in stdout_output

def should_abort(state):
stdout_output = state.posix.dumps(sys.stdout.fileno())
return 'Try again.'.encode() in stdout_output

simulation.explore(find=is_successful, avoid=should_abort)

if simulation.found:
solution_state = simulation.found[0]

solution0 = solution_state.solver.eval(password0)
solution1 = solution_state.solver.eval(password1)

solution = ' '.join(map(str, [ solution0, solution1 ]))
print(solution)
else:
raise Exception('Could not find the solution')

if __name__ == '__main__':
main(sys.argv)

Bu senaryoda, girdi scanf("%u %u") ile alındı ve değer "1 1" verildi, bu nedenle yığın değerleri 0x00000001 kullanıcı girdisinden gelmektedir. Bu değerlerin $ebp - 8'de nasıl başladığını görebilirsiniz. Bu nedenle, kodda $esp'den 8 bayt çıkardık (o anda $ebp ve $esp aynı değere sahipti) ve ardından BVS'yi itmiş olduk.

Statik Bellek Değerleri (Küresel Değişkenler)

import angr
import claripy
import sys

def main(argv):
path_to_binary = argv[1]
project = angr.Project(path_to_binary)

#Get an address after the scanf. Once the input has already being saved in the memory positions
start_address = 0x8048606
initial_state = project.factory.blank_state(addr=start_address)

# The binary is calling scanf("%8s %8s %8s %8s").
# So we need 4 BVS of size 8*8
password0 = claripy.BVS('password0', 8*8)
password1 = claripy.BVS('password1', 8*8)
password2 = claripy.BVS('password2', 8*8)
password3 = claripy.BVS('password3', 8*8)

# Write the symbolic BVS in the memory positions
password0_address = 0xa29faa0
initial_state.memory.store(password0_address, password0)
password1_address = 0xa29faa8
initial_state.memory.store(password1_address, password1)
password2_address = 0xa29fab0
initial_state.memory.store(password2_address, password2)
password3_address = 0xa29fab8
initial_state.memory.store(password3_address, password3)

simulation = project.factory.simgr(initial_state)

def is_successful(state):
stdout_output = state.posix.dumps(sys.stdout.fileno())
return 'Good Job.'.encode() in stdout_output

def should_abort(state):
stdout_output = state.posix.dumps(sys.stdout.fileno())
return 'Try again.'.encode() in stdout_output

simulation.explore(find=is_successful, avoid=should_abort)

if simulation.found:
solution_state = simulation.found[0]

# Get the values the memory addresses should store
solution0 = solution_state.solver.eval(password0,cast_to=bytes).decode()
solution1 = solution_state.solver.eval(password1,cast_to=bytes).decode()
solution2 = solution_state.solver.eval(password2,cast_to=bytes).decode()
solution3 = solution_state.solver.eval(password3,cast_to=bytes).decode()

solution = ' '.join([ solution0, solution1, solution2, solution3 ])

print(solution)
else:
raise Exception('Could not find the solution')

if __name__ == '__main__':
main(sys.argv)

Dinamik Bellek Değerleri (Malloc)

import angr
import claripy
import sys

def main(argv):
path_to_binary = argv[1]
project = angr.Project(path_to_binary)

# Get address after scanf
start_address = 0x804869e
initial_state = project.factory.blank_state(addr=start_address)

# The binary is calling scanf("%8s %8s") so 2 BVS are needed.
password0 = claripy.BVS('password0', 8*8)
password1 = claripy.BVS('password0', 8*8)

# Find a coupble of addresses that aren't used by the binary (like 0x4444444 & 0x4444454)
# The address generated by mallosc is going to be saved in some address
# Then, make that address point to the fake heap addresses were the BVS are going to be saved
fake_heap_address0 = 0x4444444
pointer_to_malloc_memory_address0 = 0xa79a118
initial_state.memory.store(pointer_to_malloc_memory_address0, fake_heap_address0, endness=project.arch.memory_endness)
fake_heap_address1 = 0x4444454
pointer_to_malloc_memory_address1 = 0xa79a120
initial_state.memory.store(pointer_to_malloc_memory_address1, fake_heap_address1, endness=project.arch.memory_endness)

# Save the VBS in the new fake heap addresses created
initial_state.memory.store(fake_heap_address0, password0)
initial_state.memory.store(fake_heap_address1, password1)

simulation = project.factory.simgr(initial_state)

def is_successful(state):
stdout_output = state.posix.dumps(sys.stdout.fileno())
return 'Good Job.'.encode() in stdout_output

def should_abort(state):
stdout_output = state.posix.dumps(sys.stdout.fileno())
return 'Try again.'.encode() in stdout_output

simulation.explore(find=is_successful, avoid=should_abort)

if simulation.found:
solution_state = simulation.found[0]

solution0 = solution_state.solver.eval(password0,cast_to=bytes).decode()
solution1 = solution_state.solver.eval(password1,cast_to=bytes).decode()

solution = ' '.join([ solution0, solution1 ])

print(solution)
else:
raise Exception('Could not find the solution')

if __name__ == '__main__':
main(sys.argv)

Dosya Simülasyonu

#In this challenge a password is read from a file and we want to simulate its content

import angr
import claripy
import sys

def main(argv):
path_to_binary = argv[1]
project = angr.Project(path_to_binary)

# Get an address just before opening the file with th simbolic content
# Or at least when the file is not going to suffer more changes before being read
start_address = 0x80488db
initial_state = project.factory.blank_state(addr=start_address)

# Specify the filena that is going to open
# Note that in theory, the filename could be symbolic.
filename = 'WCEXPXBW.txt'
symbolic_file_size_bytes = 64

# Create a BV which is going to be the content of the simbolic file
password = claripy.BVS('password', symbolic_file_size_bytes * 8)

# Create the file simulation with the simbolic content
password_file = angr.storage.SimFile(filename, content=password)

# Add the symbolic file we created to the symbolic filesystem.
initial_state.fs.insert(filename, password_file)

simulation = project.factory.simgr(initial_state)

def is_successful(state):
stdout_output = state.posix.dumps(sys.stdout.fileno())
return 'Good Job.'.encode() in stdout_output

def should_abort(state):
stdout_output = state.posix.dumps(sys.stdout.fileno())
return 'Try again.'.encode() in stdout_output

simulation.explore(find=is_successful, avoid=should_abort)

if simulation.found:
solution_state = simulation.found[0]

solution = solution_state.solver.eval(password,cast_to=bytes).decode()

print(solution)
else:
raise Exception('Could not find the solution')

if __name__ == '__main__':
main(sys.argv)

Sembolik dosyanın, sembolik verilerle birleştirilmiş sabit veriler de içerebileceğini unutmayın:

# Hello world, my name is John.
# ^                       ^
# ^ address 0             ^ address 24 (count the number of characters)
# In order to represent this in memory, we would want to write the string to
# the beginning of the file:
#
# hello_txt_contents = claripy.BVV('Hello world, my name is John.', 30*8)
#
# Perhaps, then, we would want to replace John with a
# symbolic variable. We would call:
#
# name_bitvector = claripy.BVS('symbolic_name', 4*8)
#
# Then, after the program calls fopen('hello.txt', 'r') and then
# fread(buffer, sizeof(char), 30, hello_txt_file), the buffer would contain
# the string from the file, except four symbolic bytes where the name would be
# stored.
# (!)

Kısıtlamaların Uygulanması

Bazen 16 karakter uzunluğundaki 2 kelimeyi karakter karakter karşılaştırmak gibi basit insan işlemleri, angr için çok maliyetli olabilir çünkü her bir if için 1 dal oluşturması gerektiğinden üstel olarak dallar üretmek zorundadır: 2^16 Bu nedenle, angr'dan önceki bir noktaya dönmesini istemek (gerçek zor kısmın zaten yapıldığı yer) ve bu kısıtlamaları manuel olarak ayarlamak daha kolaydır.

# After perform some complex poperations to the input the program checks
# char by char the password against another password saved, like in the snippet:
#
# #define REFERENCE_PASSWORD = "AABBCCDDEEFFGGHH";
# int check_equals_AABBCCDDEEFFGGHH(char* to_check, size_t length) {
#   uint32_t num_correct = 0;
#   for (int i=0; i<length; ++i) {
#     if (to_check[i] == REFERENCE_PASSWORD[i]) {
#       num_correct += 1;
#     }
#   }
#   return num_correct == length;